Pages (201 of 1234): First, Prev, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125, 126, 127, 128, 129, 130, 131, 132, 133, 134, 135, 136, 137, 138, 139, 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, 150, 151, 152, 153, 154, 155, 156, 157, 158, 159, 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, 170, 171, 172, 173, 174, 175, 176, 177, 178, 179, 180, 181, 182, 183, 184, 185, 186, 187, 188, 189, 190, 191, 192, 193, 194, 195, 196, 197, 198, 199, 200, 201, 202, 203, 204, 205, 206, 207, 208, 209, 210, 211, 212, 213, 214, 215, 216, 217, 218, 219, 220, 221, 222, 223, 224, 225, 226, 227, 228, 229, 230, 231, 232, 233, 234, 235, 236, 237, 238, 239, 240, 241, 242, 243, 244, 245, 246, 247, 248, 249, 250, 251, 252, 253, 254, 255, 256, 257, 258, 259, 260, 261, 262, 263, 264, 265, 266, 267, 268, 269, 270, 271, 272, 273, 274, 275, 276, 277, 278, 279, 280, 281, 282, 283, 284, 285, 286, 287, 288, 289, 290, 291, 292, 293, 294, 295, 296, 297, 298, 299, 300, 301, 302, 303, 304, 305, 306, 307, 308, 309, 310, 311, 312, 313, 314, 315, 316, 317, 318, 319, 320, 321, 322, 323, 324, 325, 326, 327, 328, 329, 330, 331, 332, 333, 334, 335, 336, 337, 338, 339, 340, 341, 342, 343, 344, 345, 346, 347, 348, 349, 350, 351, 352, 353, 354, 355, 356, 357, 358, 359, 360, 361, 362, 363, 364, 365, 366, 367, 368, 369, 370, 371, 372, 373, 374, 375, 376, 377, 378, 379, 380, 381, 382, 383, 384, 385, 386, 387, 388, 389, 390, 391, 392, 393, 394, 395, 396, 397, 398, 399, 400, 401, 402, 403, 404, 405, 406, 407, 408, 409, 410, 411, 412, 413, 414, 415, 416, 417, 418, 419, 420, 421, 422, 423, 424, 425, 426, 427, 428, 429, 430, 431, 432, 433, 434, 435, 436, 437, 438, 439, 440, 441, 442, 443, 444, 445, 446, 447, 448, 449, 450, 451, 452, 453, 454, 455, 456, 457, 458, 459, 460, 461, 462, 463, 464, 465, 466, 467, 468, 469, 470, 471, 472, 473, 474, 475, 476, 477, 478, 479, 480, 481, 482, 483, 484, 485, 486, 487, 488, 489, 490, 491, 492, 493, 494, 495, 496, 497, 498, 499, 500, 501, 502, 503, 504, 505, 506, 507, 508, 509, 510, 511, 512, 513, 514, 515, 516, 517, 518, 519, 520, 521, 522, 523, 524, 525, 526, 527, 528, 529, 530, 531, 532, 533, 534, 535, 536, 537, 538, 539, 540, 541, 542, 543, 544, 545, 546, 547, 548, 549, 550, 551, 552, 553, 554, 555, 556, 557, 558, 559, 560, 561, 562, 563, 564, 565, 566, 567, 568, 569, 570, 571, 572, 573, 574, 575, 576, 577, 578, 579, 580, 581, 582, 583, 584, 585, 586, 587, 588, 589, 590, 591, 592, 593, 594, 595, 596, 597, 598, 599, 600, 601, 602, 603, 604, 605, 606, 607, 608, 609, 610, 611, 612, 613, 614, 615, 616, 617, 618, 619, 620, 621, 622, 623, 624, 625, 626, 627, 628, 629, 630, 631, 632, 633, 634, 635, 636, 637, 638, 639, 640, 641, 642, 643, 644, 645, 646, 647, 648, 649, 650, 651, 652, 653, 654, 655, 656, 657, 658, 659, 660, 661, 662, 663, 664, 665, 666, 667, 668, 669, 670, 671, 672, 673, 674, 675, 676, 677, 678, 679, 680, 681, 682, 683, 684, 685, 686, 687, 688, 689, 690, 691, 692, 693, 694, 695, 696, 697, 698, 699, 700, 701, 702, 703, 704, 705, 706, 707, 708, 709, 710, 711, 712, 713, 714, 715, 716, 717, 718, 719, 720, 721, 722, 723, 724, 725, 726, 727, 728, 729, 730, 731, 732, 733, 734, 735, 736, 737, 738, 739, 740, 741, 742, 743, 744, 745, 746, 747, 748, 749, 750, 751, 752, 753, 754, 755, 756, 757, 758, 759, 760, 761, 762, 763, 764, 765, 766, 767, 768, 769, 770, 771, 772, 773, 774, 775, 776, 777, 778, 779, 780, 781, 782, 783, 784, 785, 786, 787, 788, 789, 790, 791, 792, 793, 794, 795, 796, 797, 798, 799, 800, 801, 802, 803, 804, 805, 806, 807, 808, 809, 810, 811, 812, 813, 814, 815, 816, 817, 818, 819, 820, 821, 822, 823, 824, 825, 826, 827, 828, 829, 830, 831, 832, 833, 834, 835, 836, 837, 838, 839, 840, 841, 842, 843, 844, 845, 846, 847, 848, 849, 850, 851, 852, 853, 854, 855, 856, 857, 858, 859, 860, 861, 862, 863, 864, 865, 866, 867, 868, 869, 870, 871, 872, 873, 874, 875, 876, 877, 878, 879, 880, 881, 882, 883, 884, 885, 886, 887, 888, 889, 890, 891, 892, 893, 894, 895, 896, 897, 898, 899, 900, 901, 902, 903, 904, 905, 906, 907, 908, 909, 910, 911, 912, 913, 914, 915, 916, 917, 918, 919, 920, 921, 922, 923, 924, 925, 926, 927, 928, 929, 930, 931, 932, 933, 934, 935, 936, 937, 938, 939, 940, 941, 942, 943, 944, 945, 946, 947, 948, 949, 950, 951, 952, 953, 954, 955, 956, 957, 958, 959, 960, 961, 962, 963, 964, 965, 966, 967, 968, 969, 970, 971, 972, 973, 974, 975, 976, 977, 978, 979, 980, 981, 982, 983, 984, 985, 986, 987, 988, 989, 990, 991, 992, 993, 994, 995, 996, 997, 998, 999, 1000, 1001, 1002, 1003, 1004, 1005, 1006, 1007, 1008, 1009, 1010, 1011, 1012, 1013, 1014, 1015, 1016, 1017, 1018, 1019, 1020, 1021, 1022, 1023, 1024, 1025, 1026, 1027, 1028, 1029, 1030, 1031, 1032, 1033, 1034, 1035, 1036, 1037, 1038, 1039, 1040, 1041, 1042, 1043, 1044, 1045, 1046, 1047, 1048, 1049, 1050, 1051, 1052, 1053, 1054, 1055, 1056, 1057, 1058, 1059, 1060, 1061, 1062, 1063, 1064, 1065, 1066, 1067, 1068, 1069, 1070, 1071, 1072, 1073, 1074, 1075, 1076, 1077, 1078, 1079, 1080, 1081, 1082, 1083, 1084, 1085, 1086, 1087, 1088, 1089, 1090, 1091, 1092, 1093, 1094, 1095, 1096, 1097, 1098, 1099, 1100, 1101, 1102, 1103, 1104, 1105, 1106, 1107, 1108, 1109, 1110, 1111, 1112, 1113, 1114, 1115, 1116, 1117, 1118, 1119, 1120, 1121, 1122, 1123, 1124, 1125, 1126, 1127, 1128, 1129, 1130, 1131, 1132, 1133, 1134, 1135, 1136, 1137, 1138, 1139, 1140, 1141, 1142, 1143, 1144, 1145, 1146, 1147, 1148, 1149, 1150, 1151, 1152, 1153, 1154, 1155, 1156, 1157, 1158, 1159, 1160, 1161, 1162, 1163, 1164, 1165, 1166, 1167, 1168, 1169, 1170, 1171, 1172, 1173, 1174, 1175, 1176, 1177, 1178, 1179, 1180, 1181, 1182, 1183, 1184, 1185, 1186, 1187, 1188, 1189, 1190, 1191, 1192, 1193, 1194, 1195, 1196, 1197, 1198, 1199, 1200, 1201, 1202, 1203, 1204, 1205, 1206, 1207, 1208, 1209, 1210, 1211, 1212, 1213, 1214, 1215, 1216, 1217, 1218, 1219, 1220, 1221, 1222, 1223, 1224, 1225, 1226, 1227, 1228, 1229, 1230, 1231, 1232, 1233, 1234, Next, Last

Wrestling Forums

involving different types of products

Posted in Wrestling Forums by meishengchao at 09:03, May 21 2015

Studies show that diversification strategy is one of the most important methods of business strategy, which itself has a risk aversion product cycle, to avoid a single competition, etc., but it also has the inevitable harmful, once the operating means out of control, the enterprise has fatal blow. In general, diversification is more research enterprise while operating in a number of different business-related or non-related industries in a strategic manner, to expand the scope, diversify risk and increase profits. However, as a minor industry of wood flooring industry, the author of can be recycled for second use outdoor floorsthe diversification strategy reclassified into cross-industry diversification, diversification within the industry, brand diversification and category diversification, so-called cross-industry diversification, is our economy diversification strategy to improve the field often, it involves more than two industry sectors, the operation mode is essentially complete by buy into;

within the so-called industry diversification, the author is a separate division, referring to within the same industry, Different companies set up operations carried out, it has a certain intersection and brand diversification; I called brand diversification means within the same enterprise, set up to operate different brands, to seek a competitive advantage market operations; author mouth multivariate category technology, is an enterprise in the same brand operation, involving different types of products, and these categories in some way have relevance and similarity. Because of the special flooring industry, the author in this paper do not do research on cross-industry diversification, and now we look at several other of the strategic approach and its characteristics.different kinds of fence materials that look like wood The industry diversification strategy, mergers and acquisitions completed cake making] In general, diversification mostly deal is completed, its three main considerations; First, industry trends and profit analysis, is always a sunrise industry key enterprises concerned, money is always the focus of enterprises; second, capital strength .

Third, ease of entry and exit. Diversification within the industry will inevitably lead to brand diversification, to distinguish the author mouth brand diversification model, I call it more of brand diversification business, now we have to study more diversified corporate brand should pay attention to. In fact, brand diversification and more enterprises have great advantages, as it can replicate the success on the basis of experience, one after another to foster strong regional brand to brand, so the development of multi-occupy the main market; it can also be based on different enterprises consumer market positioning, occupy different consumer groups, set up its own brand on every level of the pyramid, which is of course favorable to their development in the industry. However, applications of green composites for outdoorthe problem is that this mode of operation is not without its fatal flaw, that is, "big woods, of course, more birds, but if the environment changes around once, and the birds no longer fly, then what will happen?" plain language explanation is that this mode of operation for large high environmental requirements, once the entire economic downturn, all businesses are affected, it will have the difficult conditions.

Wood floor cleaner two-step easy to get

Posted in Wrestling Forums by meishengchao at 06:33, May 21 2015

Lead: cleaning and maintenance of wood flooring is always plagued by a lot of people, in fact, once you have a wood floor cleaning focus, this is not a difficult task. Today small finishing three wood floor cleaning and maintenance tips for you to use in daily life.
Now many families after the finish floor pavement, for how "daily cleaning floor" became a surprise thing that it is very difficult to clean the floor, in fact, is not so complicated floor cleaner, just remember section, carefully clean the floor, very convenient. Here are three tips to clean the floor.
First, waxing article
Floor waxing number should not be frequent, should be appropriate for the floor waxing. Waxing can play moisture, damage, increase surface finish and easy to clean and so on, but if the number is too frequent waxing, will cause damage to the floor. Frequent waxing can cause wax scale wax layer stack, and an intermediate layer of wax will be twice the ash layer, affecting the waxing results. Now the average family are using a relatively affordable price laminate flooring, and strengthen the surface of the floor is a layer of aluminum oxide, water and other liquids do not easily penetrate to the floor inside, so if it is to strengthen the floor waxing, the wax layer can not penetrate into the floor inner layer can only wood composite for sale dubai, will leave footprints when people walk, a long time like the floor surface becomes "big face" in general, the impact is difficult to wipe the floor beautiful and care. Therefore Laminate flooring is not suitable for waxing.
When the air is dry, laminate flooring should not be used for cleaning and maintenance decontamination powder, and avoid using abrasive paper polishing. You can wring dry cloth to wipe, and then care solution maintenance, wipe hard place removed with special cleaning agents.
Solid wood flooring in the daily cleaning should be used wrung cotton swab to wipe in case of stubborn stains, use a mild cleaning solvent, then wipe clean with a cotton swab wrung, do not use acid, alkali and other organic solvent or gasoline solvent scrubbing. And do not put strong acid and strong alkaline substances such as on the floor.
Cleaning and maintenance of laminate flooring is relatively simple, but can not be taken lightly. Clean the application is not dripping wet mop to, and increase the surface moisture, can effectively solve the generation gap and cracking floors. If there is greasy stains when rubbed with a cloth moistened with cleaner can.
Second, to prevent scratching the floor fines
Fine gravel floor surface long stay, after walking back and forth, gravel signs of tendura porch flooring tongue and groove. In addition to gravel, dirt, hard-soled shoes, sharp metal, glass floor tiles are 'skin' nemesis, in order to reduce particulate wear floor, keeping the floor clean is important. After ventilation window pay attention to clean the floor, if there are dust or gravel, should immediate vacuuming and cleaning.
In addition, the gray gravel on the floor with a damp cloth and should not mop handle, wrapped in gray gravel between them is likely to cause surface wear floor paint scratches; Also note, do not make contact with the floor or placed directly on the fire floor large power electric heaters, can not be placed directly kettle, stove and other hot objects.

Be patient and careful maintenance of the floor

Posted in Wrestling Forums by meishengchao at 01:44, May 21 2015

1. Keep the floor dry, clean, do not allow water wet mop or alkaline, soapy water, so as not to undermine the brightness of paint, paint damage. In cases where the dust or dirt with a dry mop or wet mop wrung. Per month (or two months) to play a wax (before waxing to clean moisture and stains).
2. In case of heating or other leaks on the ground must be promptly cleaned, can not direct sun exposure or baking furnace, in order to avoid excessive drying, cracking floor.
3. good floor paint long live, do not use cloth or paper cover, over time the film will be sticky and dull, but avoid hot water basin, hot cooking pots and other objects placed directly on the floor surface, Application of wood or straw cushion, so as not to scorch the film.
4. The local board accidentally stained <a href="http://environmentallyfriendlyfloor.com/solution/3930.html">best price for composite decking in iceland</a>, if traces of oil can be used rag or mop dipped in warm water or a small amount of detergent to clean, mild soap and water can also be used to add a little dish detergent scrub. If serious stains, use this method invalid, the available quality sandpaper or steel wool to wipe gently. If it is drugs, drink or paint stains, the stains must be cleared before not penetrate the wood surface, remove Methods Baptist dip furniture wax soft cloth. If still valid, must steel wool dipped in wax wipe furniture. If the surface of the floor layer is burning cigarette, soaked furniture wax with a soft cloth wipe hard recoverable light. If ink contamination, should be timely Baptist wax soft cloth, if does not work, then steel wool dipped in wax wipe furniture.
5. Paint the floor after laying to minimize direct sunlight, so as not to paint too much exposure to ultraviolet light, dry and aging in advance. Place furniture on the floor rubber applications or other soft material paving, floor paint to prevent scoring.
6. floor during use, if that individual floors warped or <a href="http://environmentallyfriendlyfloor.com/solution/730.html">plastic external building panels</a>, stripped off the old glue and ash, painted with the new plastic compaction; if damaged or Lu Bai individual floor paint, available 400 No. sandpaper dipped in soapy water polished and clean, to be dry, partial complementary color, color after dry, then brush a paint dry for 24 hours, with 400 water sandpaper polished, then rub wax polish.

how to Win competition in the market

Posted in Wrestling Forums by meishengchao at 01:14, May 21 2015

This reporter recently visited the various wood flooring brands understand that in the face of market downturn and fierce competition, some well-known brands began in the service force. Competition spawned war service Henan Shengda Industry Co., Ltd., general manager of Hong Yuan admitted that in addition to the upper reaches of the affected real estate industry this year, the development of wood floor also met two other difficulties, "First, the current international economic situation makes wood exports were hit, Wood floor general operational difficulties encountered, followed by the issue of raw materials for the entire wood floor is concerned, more competitive, industry reshuffle continue to accelerate. " Pei Kaifeng general manager living at home Baroque floor analysis, sit and wait for death is better to find a way to break out of wood flooring manufacturers realized that the crisis has begun to seek change,Fireproof wood Plastic Decking who can pull out "Nitui" from the price war, to brand, service to win, who will be able to go further in future market competition. Reporters in Phoenix sales floor area to see some well-known brands have wooden flooring new marketing thrust, the new service. For example, the nature of the floor launched the "Golden nanny service" SITA floor launched extended warranty service, the World Friends of the floor launched the "Golden carpenter services".

The most favored businessmen is "a 1-year warranty extended to 3 years", "wood floor service hotline", "0 Pavement loss" of after-sales value-added services. "Previously, the flooring market over-expansion led to disorderly competition between brands, good and bad of the brand and quality vary widely divergent leaving consumers seriously affected consumer confidence in the market. Market service war started,white plastic fence that looks beautiful more conducive to big brands growth. "Nature Flooring, general manager of Henan, said the company niehuxiao, wood product homogeneity more and more serious, how to Win competition in the market, how to stand out in a number of brands, in fact, the service gives the entire industry a war good answer.

Consumers: fear manufacturers take service as a gimmick "Businesses are to extend the warranty period and other new services for our customers, it is a good thing. After all, the floor belongs to consumer durables, the original one-year warranty period a little short, extended to 3 years .'0 pavement quite reasonable wear and tear ' but also to avoid the loss of business by the name of more than increase costs to consumers. value-added services, "ready to purchase wood flooring citizen Mr. Qu for businesses to provide very welcome. But there are consumers worried, before buying the floor a quality problem, Composite Decking Material Reviewfear is even ignored perfunctory floor businesses. Now strengthen after-sales support is a good thing, but afraid of businesses just take service slogan when gimmick "flicker" people.

Antique wood flooring how to choose?

Posted in Wrestling Forums by meishengchao at 09:24, May 20 2015

Surface antique wood flooring is an art form to a classic style of wood flooring through special processing. Antique wood flooring rough, thick, unique, to maximize the retention of the natural flavor of wood.
Antique wood flooring in line to return to nature but also demonstrates the unique charm of personality, has been gradually accepted by consumers, especially for your decor requires individual differences are more sought after groups. Antique wood flooring solid wood flooring has become a new bright spot in home use. In the face of many floor to launch the uneven quality of antique wood floors, how consumers should identify how to purchase it?
Test: Consumers can take a one-dollar coin scratch the floor surface, if it is good quality, face paint and primer good adhesion, the surface almost undamaged. The poor quality of the floor surface will be from the powder, and even depression.
Look: concavity of antique wood floors, look at each piece of board "black side", such as craft good, its higher level of treatment, "black side" will be smaller. Look at the surface of the floor is what species do substrate surface layer thickness is much, can distinguish their quality.
Consumers can take a sample of several brands of antique wood floor flooring (color close) were compared: ratio. Compare its gloss and feel, plus shave test mentioned above, the product is good or bad they will automatically appear. Moisture Measurement: purchase 8x8 lumber post. Therefore, businesses should consult before buying location equilibrium moisture content, moisture content is generally between 8% to 13%, when consumers buy need to buy a suitable local moisture content of flooring and related products.
Such as American red oak antique wood flooring Design options: divide by color, antique floor there are dark and light, according to the process to points, there are three-dimensional and brushed antique antique series. Therefore, choose a color and processes, to a large extent define the decoration style of direction.
However, many consumers in the purchase of the floor, in the pursuit of unity, tend to buy a single species or a single color of the floor. But antique floor with distinctive known, consumers can choose according to build lattice deck railing. Such as the child's bedroom, you can choose the color bright floor, deep in the study can choose the color of the floor thick.

small area of ??the room can be used light and color

Posted in Wrestling Forums by meishengchao at 08:19, May 20 2015

Decorative flooring increasingly prominent role. In the pursuit of personalized, diversified decorative effect, laminate flooring has advantages bright, clear texture, shiny and so on. However, when you select the floor overall coordination is very important, because the floors and walls are large areas, so their color choice will determine the tone of the entire home environment. Rational use of floor color, line mix, to create a very comfortable visual space. For ages and man's floor color and pattern of a great relationship. Psychological younger people more will choose bright colors and strong visual impact, it seems the only way to demonstrate their flying personality. To the man about 30 years old, most will choose the color lighter, elegant color of the floor, because people this age are already quite mature, started their own distinct preferences, style began to pay attention, but still would like the color bright Gezer. And so on into middle age,hollow to floor measurements we begin to prefer grace and atmosphere, stable wood color and thick texture gradually occupied a dominant. Floor color shall be determined according to the size of the home decor area, depending on the overall decor.

If the room is large and adequate lighting area, are advised to use darker color, texture coarse wood floor, making it relatively compact larger rooms; on the contrary, a small area of ??the room can be used light and color, texture delicate wooden floors, It gives a sense of openness, but also make a small room look more spacious. Many people in the planning, always thought very mature, but in the end the results are often unsatisfactory. This is often a problem with. Despite all the colors of the floor, the floor of the proposal or the use of plain color, anti uv building outdoor deck Hordalandsuch as white, white, snow white, gray and so on, so as not to embarrass late when buying furniture. Of course, in a coordinated basis, a small amount of contrast you can try, such as furniture, dark colors can be reconciled with a neutral floor. Comparison of two colors can give the space a new life, creating a distinctive visual experience.

Different floor will give people a different visual experience, and in the heart of particular emotional response, if a variety of wood "temperament" understanding, so that the final result will meet their expectations. Decorated with mahogany floors, to get a warm feeling of tranquility; crimson decorative flooring can bring out the luxury, eco-friendly flooring deckingsolemn atmosphere; white maple floor prominent elegant, practical style; beech floor a bright and comfortable room; birch floors can make a small The room looks clean, not crowded; walnut floors look solemn and noble; oak floors seem free, uninhibited, return to nature.

What is a hardwood floor? How to care for hardwood floors?

Posted in Wrestling Forums by meishengchao at 06:33, May 20 2015

Hardwood, softwood is a known intuitively, hardwood name implies, is a fine compact wooden structure, generally so very heavy wood, mahogany belong to the hardwood, but not all hardwoods are mahogany, especially in the floor species, hardwood floors generally refers to: ash, birch, walnut, locust trees, crabapple trees, beech, advanced wood floor use wood cherry wood, longan wood, camphor and so on.
The cork flooring is with respect to the appeal and said those hardwood floors, such as: pine, fir.
Hardwood floors are elegant and durable, however, busy families can use once its toll on best flooring for decks. It will introduce some of the basic skills in maintenance hardwood floor:
With a soft broom
Gently sweep everyday hardwood floors, not only will keep it clean, and keep the floor from scratches.
With a wet mop instead of a wet mop mop
If your water coffee color composite decking open-air corridor, causing permanent damage, through your floor warp. Glum, however, make sure that your hardwood floor with polyurethane paint.

led to solid wood flooring blanks prices soaring

Posted in Wrestling Forums by meishengchao at 05:56, May 20 2015

Large manufacturers will focus on the control of raw materials, a number of small factories, small brands of raw material resources will gradually lose. Production of small-scale enterprises will be more a lack of competitive advantage in the market were eliminated or forced restructuring, some small plants will become more apparent from big brand OEM factory, at the same time, control of resources, with large-scale production advantages of the big brands will gradually dominating the flooring market. composite materials for picnic tablesResource monopolies As market competition intensifies, any business has to face such an indisputable fact: every industry oversupply, many of the competing brands strife limited market resources.

Flooring market is also the case, an increase in flooring business, competition, leading to more and more meager profits. Especially solid wood flooring business, due to upstream resource constraints, led to solid wood flooring blanks prices soaring, most companies are caught in the bottleneck of resources, only a few have a large stock inventory of businesses to easily weather the storm. It can be said in the future competition in the flooring industry, who control the timber resources supply chain, will win the opportunity of development.?never needs painting deck bench with backrestTo establish a global brand At present the quality and structure of solid wood flooring have reached a higher level, especially for floor natural appearance of defects and quality control are already comparable with foreign products. However, with the expansion of global strategy, quality wooden floors demands will be higher floor will further improve future stability in timber handling, drying, curing cycle and surface wear resistance and paint adhesion aspect of the process.

Meanwhile lock technology, ultra-wearable technology, anti-static technology, environmental protection technology and DIY products, technology and technological innovation will become easier to install the flooring industry mainstream. Even the brand leader in large-scale, but if there is no global vision, no global brand to lead, windproof fencing Manufacturers ukthe sheer size can not achieve the desired effect. For Chinese flooring industry, we are to the world, first there must be a strong flooring industry, the second floor have a strong brand, there must be a strong third floor entrepreneurs. Chinese flooring companies continue to expand their scale, the need to establish a strong international brand concept, with the globalization of the industry move to advance a strong brand of the world's best wood floor columns and floor become the world market leader.

Wood floor with laminate flooring

Posted in Wrestling Forums by meishengchao at 01:38, May 20 2015

Recently, the quality supervision and inspection AQSIQ Laminate flooring products showed that 81 production of 81 kinds of product sample pass rate of 99.1%, excessive formaldehyde emission quality is still a major problem. What is the status flooring industry? Reporters interviewed the Secretary-General of China National Forest Products Industry Association Flooring Committee Lu Bin. Among the ranks of the largest producer of wood flooring Wood floor with laminate flooring, solid wood flooring, engineered flooring and bamboo flooring for leading products. Laminate flooring industry in the high growth from 2001 to 2005, the growth rate slowed; parquet industry for seven consecutive years of rapid growth;western red cedar tongue in groove porch flooring solid wood flooring industry declined in 2005, then a few years the rate of decline slowed, this year has stabilized ; bamboo flooring after the rapid growth in sales in 2006, sales leveled off since 2007. Lu Secretary-General pointed out that after 20 years of development, China's wood floor has formed a multi-species, multi-standard and multi-grade, from production, sales service to supporting the industrial system.

At present, companies engaged in the production of wood flooring about 3000, employing more than 1 million, the total output value reached 50 billion yuan, China's wood flooring production has been among the ranks of great powers. 10 years according to a renovation of residential, non-residential renovation for 20 years once, and can be decorated floor area of ??80% to calculate the area of ??surface decoration total about 3.987 billion square meters. However, China's wood flooring sales in the past three years a total of only 654 million square meters, accounting for only 16.4% in the past three years all surface decoration materials, indicating that the ground is still decorated tiles, stone-based, wood share small share.plastic laminate around swimming pool China Forestry Industry Association Flooring Committee predicts that by 2010, China's flooring production will reach 500 million square meters, with an average increase of about 13 percent per year.

class mainstream floor to meet different consumer needs "Various types of wood flooring due to resource constraints, the technical content of different, different product characteristics and quality, the development prospects are not the same." Lu Bin, analysts say. Laminate flooring has a wear-resistant, moisture-proof, easy to install, easy to clean and care, economic and practical advantages, the future will continue to dominate the wood flooring market. Driven by the fierce market competition and the development of the industry, its products will be more artistic, personal and environmental protection, surface treatment technology become more diversified. Such as imitation wood floor, the small size of the fight side,correct wood plastic deck materials chamfering, synchronous wood, antique, antibacterial, mute, anti-static, and heating and other laminate flooring production will gradually increase.

Identification of the factory only repair

Posted in Wrestling Forums by meishengchao at 17:19, May 19 2015

Consumers peace of mind, choose the B & Q for renovation, only a week after the renovation, has not yet had time to check in, the floor appeared a dozen different degrees of cracking. Consumers were dissatisfied rights, but insisted that the factory floor paint crack is a national standard range, is only responsible for maintenance. The two sides at loggerheads over. Cracks up to 20 cm complaints Yesterday afternoon, the Post reporter went to Bo Road, Yangpu District, Lane 567, Mr. Miao home, see the living room, dining room and two bedrooms can be seen in the wooden floor, a dozen cracking phenomenon occurs. Which amounted to about 20 cm long crack at a couple of small cracks are 3-5 cm range, anti-fungus deck vinyl floor coveringin particular to see clearly in the sun. Mr. Miller said that in April 2008, he signed a contract with Shanghai Construction Decoration Engineering Co., Ltd. B & Q decoration, and in accordance with the Shanghai B & Q Building Materials Supermarket Co., Ltd.

signed a contract within the available supply of materials, all decoration materials are available from B & Q Yangpu, where to buy the wood flooring Flooring Co., Ltd. Shanghai Hua Jing Chun brand Okan floor. July completion of the renovation, acceptance week later when cleaning new homes unexpectedly found that there have been many wooden floor cracks, which surprised him, how could this just paved floor, Mr. Yu Shimiao complained to the B & Q Service Department. Identification of the factory only repair is not refundable After receiving complaints, the B & Q convene renovation construction supervisor, wood flooring manufacturers representatives and renovation construction team leaders to identify Mr. plastic square deck drainsMiao family situation. According to Mr. Miller said that they just glances, said it was a factory floor paint crack, below the national standard range, they only try to repair cracked floor to restore it, and in the original one-year warranty on again extended by one year warranty."New home just completed renovation, repair should not live, it can not be justified." Mr. Miller expressed look at it to identify the conclusion of a bit too casually, he can not accept this identification results and solutions.

Repair neighbor evidence not solve the problem We live in the same district of Doris, and Mr. Miller is also the same as in June and July bought wood from B & Q Yangpu, paved soon after discovered more than a dozen cracks. She accepted the compromise package on the floor of B & Q company carried out the repairs, technicians polished the wood cracking place, then re-painting. But not only does not solve the old problems, and has added a new problem, that is the color of polished floors place in and around the relatively large difference, at first glance, the room on the floor like playing a few patches. Decoration Industry Association in Shanghai under the mediation of Mr. Miller believes cracking floor below the floor quality problems, anti-cracking plastic decking sale in Colombiaor remove all floors and compensation for economic losses, or compensation for total floor 15,944.04 yuan 80%, no maintenance. B & Q said it could not accept such a solution, if consumers insist that the problem is the quality of the floor needs to find their own identification of the relevant departments were identified. Negotiations deadlocked issues.

the manufacturing plant to build solid wood floor

Posted in Wrestling Forums by meishengchao at 09:20, May 19 2015

Brand competition is the strength of the dispute, product quality determines victory or defeat. Beautiful appearance and slick packaging by the market and consumers will eventually be double test, real gold quality or skin deep, consumer word of mouth is the most authoritative "referee." Pursuit of perfect quality, the pursuit of perfect service, is the ultimate goal of long-Sheng. Jiusheng to consumers not only cherished "five commitments" as a service assurance, we have also established a sound service system (appointment - Exploration - Installation - Cleaning - Acceptance - visit = six-star service system). The end of the service system is not service, long-Sheng "a hundred bus service Households" activities, the national linkage regularly visit, installing exterior cladding on toweractive-site service to consumers, as consumers sent uninterrupted Jiusheng condolences. Extension services, so that consumers get while consumer care, won the trust of consumers, and thus long-sheng reputation in consumer groups.

Seven years, long-Sheng floor completed a second mission on the growth path, experiencing a time of baptism, and writing a chapter of the legendary wood. Metamorphosis seven years, from distinctive style to the "true" original ecological landscape, from the local to the national well-known brand of professional brand; from the "wood Kolin phrase" series to the "original" series, the "original" series then to the "original" precious series; from the manufacturing plant to build solid wood floor of the six global sourcing base, billet and processing base, specializing in wood flooring production base, parquet and laminate flooring production base set of industry chain, and always adhere Jiusheng "intention to create" attitude to complete a time of transformation, composite wood Garden fencelong-sheng products also completed a second style of sublimation.

Today, original style affects the Chinese wood flooring fashion, style guide really wood floor, long-sheng, from product development, technological innovation, style, innovation, service innovation and other aspects of the interpretation of the long Shengchuan Qi.China Building Material Test Certification Professor Tang Yueqing Center, Senior Engineer, Senior Engineer of the State Forestry Institute Forestry Industry Chengzhi Kun, vice president of the China Timber Circulation Association of Timber Circulation Yang Meixin associate professors and other professional committees. child play yard composite fenceWah Ming, chairman of Lan floor Sanming, blue Qiang, general manager, marketing manager Shi Pei Road, north of the marketing center manager Lan Chang Choi and "warm Monthly" and other media reporters also participated in the review.

Create Longxi building materials market group

Posted in Wrestling Forums by meishengchao at 02:17, May 19 2015

6. sweepstakes, free gifts distributed win consumers pro-gaze. Special business activities, more interactive programs, so that consumers are delighted rewarding. Create poly letter International Building Materials City Longxi building materials market as the core group of priorities and objectives and tasks. We recently Longshan streets and gather research letter International Building Materials City next few years,hard plank made a square creating Longxi building materials market group priorities and objectives and tasks with the four "2" to summarize. The first "2" is to promote two lifting, lifting one image inside and outside the building materials market, one of the decoration quality within the market to enhance Juxin International Building Materials City has been done on the basis of the original building materials market in the Old Longxi a thorough transformation and upgrading, while other markets are planning to do in this regard,

the second one is to improve our level of service, in fact, are now competitive business, in addition to hardware competition, service competition is more important, I am sure Reporters friends even better than I do, compete software is also very important. Another is to improve our environment surrounding the market, from the government point of view this problem parking, road reconstruction issues, as well as how to further maintain the smooth flow of traffic problems, there is market support services, such as our hotel and catering marketing services, there is a number of business administration, cheap roof decking materials Albanialaw and order aspects of supporting services next step should be considered as a priority. The second is to enhance the acceptance of Longxi building materials market group of social awareness and consumers, this promotion is from our preliminary study to create a distinctive building materials market. The second "2" is to build two platforms.

The first is to build information platform, we are ready to create Longxi building materials market group own website, prepare the next step and the media, including co-founder of us here, with your advantage Longxi building materials market group founded our special issue, corrosion-resistant outdoor pavillion designsEdition and columns The next step we have to study specific, and through media networks and related professional websites, such as our website of the Ministry of Commerce of the resources of each zone well integrated, so information sharing, resource sharing. And gradually introduced our next online transactions and build e-commerce. First possible B2P, further development B2C, our dealers and factory-direct online transactions to achieve, the next step we have come to consider this aspect.

superior gap-filling qualities and good strength

Posted in Wrestling Forums by meishengchao at 05:57, May 18 2015

Using WEST SYSTEM Epoxy 57 HARDENER RESIN/HARDENER USE HARDENER TEMPERATURE RANGE (��F)* CURE SPEEDS at room temperature* 40�� 50�� Room Temp. 60�� 70�� 80�� 90�� 100�� POT LIFE 100g cupful OPEN TIME thin film CURE TO SOLID thin film 205 Fast cure��General bonding, fabric application and barrier coating 9�C12 minutes 60�C70 minutes 6�C8 hours 206 Slow cure��General bonding, fabric application and barrier coating 20�C25 minutes 90�C110 minutes 10�C15 hours 209 Extra Slow cure��General bonding, fabric application and barrier coating 40�C50 minutes 3�C4 hours 20�C24 hours 207 Clear fabric application and coating,wood straw applications for deck natural wood finish 20�C26 minutes 100�C120 minutes 10�C15 hours *Epoxy cures faster in warmer temperatures and in thicker applications��Epoxy cures slower in cooler temperatures and in thinner applications. Figure 8-1 Select a hardener for its intended use and for the cure speed best suited for your job, in the temperature range in which you are working.

8 8.2.3 Fillers Throughout this manual, we will refer to epoxy or resin/hardener mixture, meaning mixed resin and hardener without fillers added; and thickened mixture or thickened epoxy, meaning resin/hardener with one of six fillers added. With the exception of G/flex 655 and Six10 Adhesive, fillers are used to thicken the epoxy for specific applications. They are categorized as either Adhesive Fillers��used for structural bonding or gluing, and gap-filling; or Fairing Fillers��used for cosmetic surface filling. Adhesive fillers 403 Microfibers��For general bonding and gap filling. Epoxy/403 mixtures have superior gap-filling qualities and good strength for most bonding applications while retaining wetting/penetrating capabilities. Works especially well with porous woods. waterproof decks around above groundCures to an off-white color. 404 High-Density Filler��For hardware fastener bonding and applications that require maximum physical properties and where high-cyclic loads are anticipated. Also used for gap-filling where maximum strength is necessary. Cures to an off-white color. 405 Filleting Blend��For use in bonding and filleting on naturally finished wood projects.

A strong, wood-toned filler that mixes easily and spreads smoothly. Cures to a brown color and can be used to tint other fillers. 406 Colloidal Silica��For general bonding, gap-filling, high-strength bonds and fillets. A practical and versatile, trellises made of composite woodsmooth-textured filler. It can be used alone or mixed with other fillers to improve workability and smoothness. Cures to an off-white color. Fairing fillers 407 Low-Density Filler��A blended microballoon-based filler used to make a fairing compound that is easy to sand or carve while still being reasonably strong on a strength-to-weight basis. Cures to a reddish-brown color. 410 Microlight?��A very low-density filler for creating a light, easily-worked fairing compound.

Limber holes should be large and open

Posted in Wrestling Forums by meishengchao at 01:50, May 18 2015

SYSTEM epoxy surface. The LP systems have excellent resistance to sunlight, salt spray and other weathering factors. They possess outstanding abrasion resistance and Repair the epoxy coating and replace any paint or varnish used over it. Touch up dings to the varnish or paint to maintain their effective moisture and UV barriers. Plan to apply a new coat of varnish every year or two. The linear polyester/polyurethane coatings do not take buffing like a gelcoat so we recommend careful application. The acrylic/polyurethanes can be buffed but seem less durable. 7.6 Ventilation for longevity Ventilation ispergola Supplier canada a key factor in the continued longevity of your boat. Keeping the boat's interior as dry as possible is the best preventive maintenance for preserving the structure and making the boat more comfortable. Keep the bilges as dry as possible. This is a good idea whether or not the bilges of your boat have been coated with epoxy.

Make sure that drainage is good and that there are no hidden areas in the bilges where water can lie. Limber holes should be large and open. For safety and longer coating life, keep fuel and oil out of the bilges. An open interior layout is better for ventilation. Do not let clutter build up. See that no water-absorbent materials (leaves or clothing) are in contact with the hull or interior joiner work. Watertight deck or cabin openings and effective ventilators with good drainage (such as dorade boxes or mushrooms) can make the boat more comfortable when in use and drier at the dock or mooring. laying Anti-aging vinyl fence concreteIf using a fabric mooring cover, vents are available that can be sewn or snapped into the cover fabric to provide ventilation as well as weather protection. All of these factors work together to provide good ventilation.

If you have questions about options, we suggest you consult the books listed in Appendix�CAdditional reading, page 77. Protecting and Maintaining Wooden Boats 54 7 8 Using WEST SYSTEM Epoxy This section is designed to help you understand and safely handle WEST SYSTEM? epoxy products and to provide the basic techniques used in most repair and building operations. Refer to the WEST SYSTEM User Manual & Product Guide for more complete product information. precast wood walls panel for house8.1 Epoxy safety Epoxies are safe when handled properly. To use WEST SYSTEM epoxies safely, you must understand their hazards and take precautions to avoid them. Hazards The primary hazard associated with epoxy involves skin contact. WEST SYSTEM Resins may cause moderate skin irritation. WEST SYSTEM Hardeners are corrosive and may cause severe skin irritation. Resins and hardeners are also sensitizers and may cause an allergic reaction similar to poison ivy. Susceptibility and the severity of a reaction varies with the individual. Although most people are not sensitive to WEST SYSTEM Resins and Hardeners, the risk of becoming sensitized increases with repeated contact.

covering with water-soaked plywood

Posted in Wrestling Forums by meishengchao at 10:46, May 17 2015

This factor allows the builder to coat the fastener with a thin film of mold release before bonding to permit easy fastener removal after the epoxy cures. Fatigue tests of bonded threaded rods with and without a thin coating of mold release show only a 4-10% reduction in the overall fatigue strength of the fastener with mold release. A thin film mold release will yield a more predictable performance than a thick film. Mold release may include paste wax, non-stick cooking spray, silicone spray or hair spray. While the reduction in strength of the fastener treated with mold release is slight,typical deck plans for roof baltimore city it should be taken into account when calculating hardware loads. We recommend adhesive bonding to all hardware and fasteners rather than the use of mold release whenever possible.

6.6 Removing bonded hardware Occasionally it is necessary to remove bonded hardware items. At temperatures above 150��F (66��C), cured epoxy begins to lose its physical properties; the resin softens and its bonding capacity is reduced considerably. You can use this characteristic to your advantage when you would like to remove a piece of bonded hardware. 1. Remove all fasteners. If you used a release agent on them when you bonded the piece in place, they should come loose without too much difficulty. If the fasteners were bonded in, it will be necessary to apply heat to them, using a soldering iron. The epoxy around the fastener will soften enough to loosen the fastener when enough heat is conducted down the fastener. 2. Heat the fitting briefly with a propane torch. garden deck decoration materials screeningProtect the area around the fitting from heat damage by covering with water-soaked plywood. Allow the heat to conduct through the base of the hardware. A sharp rap with a mallet should be enough to dislodge the hardware. If the fitting doesn't break loose easily the first time, don't force it. Heat it a second time with the torch and try again. 3. Replace the hardware by following the procedures in Section 6.2. Re-drill the fastener holes in the existing epoxy as you would for a new installation.

Installing Hardware 47 6 7 Protecting and Maintaining Wooden Boats 7.1 Sunlight and protective coatings Sunlight poses a threat to the structure and finish of all composite boats. It attacks in two ways: heat and ultraviolet (UV) rays. wood decks for a mobile homeAny epoxy finishes without protective coatings are vulnerable to rapid ultraviolet degradation. WEST SYSTEM?Brand epoxy, including the 207 Special Hardener?, is not intended to be used as a final finish. Therefore, you should cover bare epoxy that will be exposed to direct sunlight as soon as possible with an opaque paint or a clear coating (varnish). If the surface is to be painted, add pigment to the last two coats of epoxy to protect the surface.

completely after pushing both adjoining strips

Posted in Wrestling Forums by meishengchao at 07:59, May 16 2015

2. Abrade any smooth bonding surfaces with 50-grit sandpaper and remove sanding dust. Wipe the planks with paper towels saturated with acetone or lacquer thinner 30 minutes before bonding. 3. Wet out the mating surface of the first few pieces of teak and the deck in the area of the first few strips with unthickened resin/hardener. 4. Apply a thickened epoxy mixture over the wet-out deck surface. wood plastic Decoration Materials deck MalaysiaUse G/flex 655 (or 650 thickened with 406 Filler) and add 3%�C5% 423 Graphite Powder��just enough to turn the mixture to an opaque black color. Apply a layer just thick enough to span any gaps and to squeeze up between the planks. An 809 Notched Spreader works well to apply an even layer over the substrate. 5. Locate your reference points and set the first strips in place. Repairing Hull and Deck Planking 41 Figure 5-23 Thin edge-grained strips provide an even wearing, attractive and dimensionally stable deck.

5 6. Clamp the plank in place with #10 sheet metal screws and large washers. Place the screws and washers between the strips, 8" apart. Each row of screws will clamp the edges of two adjoining planks and act as spacers (Figure 5-24 left). Coat the screws and washers with a mold release or place a small sheet of plastic under the washers to prevent bonding. Washers may also be cut from stiff plastic, thin wood lathe or similar stock with holes drilled for the screws. Tighten the screws down completely after pushing both adjoining strips tight against the screws. The epoxy mixture should squeeze up between the strips. Any voids between the planks should be filled at this time with the 655/graphite mixture. 7. Place the remaining strips, several at time, following the same procedure. 8. Allow the epoxy to cure between 8 and 24 hours before removing the screws and washers. If you wait any longer than this, staggered composite fence panelit will become much harder to break the screws free. Tighten the screw slightly (5��) before backing it out. If you have difficulty removing a screw, heat the head with a soldering gun's cutter tip. While the screw is still hot, try to unscrew it again. Repeat until you are successful. 9. Fill the screw holes with 655/graphite mixture.

A syringe loaded with the mixture will speed the process. 10. Sand the surface with a reciprocating sander and 50-grit sandpaper to level the epoxy and teak surfaces. Sand until the saw marks are removed from the teak surface. Fine sand with 80-grit sandpaper, and then finish with 120-grit. The teak surface may be left natural or finished with a marine-grade teak oil. Note: If planks thicker than ?" are used, low profile plastic wood flooringdo not fill between the planks with thickened epoxy. Instead, remove squeezed-out epoxy between planks and allow to cure. Remove the screws and washers and sand the top surface of the planks fair. Fill the joints with Thiokol or polysulfide caulk (Figure 5-24 right). Wooden Boat Restoration & Repair ?2008 Gougeon Brothers Inc., All rights reserved. Repairing Hull and Deck Planking 42 Figure 5-24 Sheet metal screws with large washers will clamp the strips in position until the 655/graphite mixture cures thoroughly.

Dry fit and use "Witness" marks

Posted in Wrestling Forums by meishengchao at 04:18, May 16 2015

Cut the panel to the outside dimensions of the bevel or step. a. Use the disc sander to machine a bevel on the inside edge of the replacement panel to match the bevel on the opening. Dry fit the new panel to fit slightly below the existing surface (Figure 5-13). b. Use the router with the straight fluted bit to machine steps in the edges of the replacement panel to match the steps around the opening. If multiple layers of Repairing Hull and Deck Planking 35 Figure 5-12 Cut out the damaged area and grind a minimum 8- to-1 bevel on all sides of the opening. Figure 5-13 Clamp a new repair patch in position with staples or screws.decorative wood outdoor panels application Dry fit and use "Witness" marks to help align patch when gluing. 5 plywood are to be used, cut one layer to the dimension of each step. Dry fit the new panel to fit slightly below the existing surface. 4. Wet out the bonding area of the panels with resin/hardener mixture. Recoat the end grain as necessary.

(Plywood end grain will absorb a lot of epoxy.) 5. Apply thickened epoxy/403 or 406 (mayonnaise consistency) to the new panel's bonding area. Apply enough thickened epoxy so that a small amount will squeeze out when you push the new panel into its dry-fit position. 6. Clamp the new panel in position with temporary staples or screws. Permanent fasteners should be non-corroding and pilot holes should be wet out with epoxy. Clean up excess epoxy before it cures. Allow the epoxy to cure thoroughly before removing clamps. Bond multiple thinner layers in place, one at a time, following the same procedure.residential vinyl fence section Use a thinner epoxy mixture on the flat bonding areas between the layers. 7. Sand the surface and fill low areas with epoxy/407 or 410 low-density filler (peanut butter consistency). Use a spreader to apply the thickened epoxy, slightly overfilling low areas on the surface. Allow the mixture to cure thoroughly before fairing.

5.3.3 Replacing/installing plywood You may install new plywood over exposed frames or over existing hull or deck surfaces. Plywood used as the primary skin (bonded directly to the frames) may be laid out with scarfed joints falling directly over the frames or with butt joints over backing plates between the frames. Scarfed joints offer a cleaner appearance from the interior. The frame spacing and size of the boat determine the thickness of the plywood. The amount of compounding determines whether the total thickness can be applied in one layer or in multiple layers. wood and plastic composite bin plateApply thinner plywood in multiple layers if one layer is too thick to bend over a curved surface. Apply a primary plywood skin as follows: 1. Prepare plywood panels, scarf joints and beam surfaces. Plan the panel layout and order of assembly so that the scarf on the following sheet lies over the scarf on the previous sheet (Figure 5-14 ). 2. Wet out the bonding surfaces of the plywood and frames.

Speaking of lights and fire inseparable

Posted in Wrestling Forums by meishengchao at 06:56, May 15 2015

Speaking of lights and fire inseparable, when people are using fat as fuel beans, butter beans served in a small earthenware bowl, put a wick, lit lighting. Ancient body of the word "light" will be able to see, light is evolved from the beans. Recorded in ancient books: "Light comes from beans, beans that tile board." Warring States period, the earliest candles began to appear. At the bottom of the ancients beans to make a tip, the irregular candle inserted in the tip, the tip is called branched nails, nail branch officially opened the history of the emergence of the lamp, since then, completed the lighting history Bean to change the lamp. Since then there has been a lot of lighting quality, clever design, exquisite workmanship, elegant texture, environmental protection and energy saving. Not simply to provide illumination in low light. And have high artistic value and aesthetic value. Until 1809, the British chemist David invention arc light, humanity has entered the era of the use of electric lighting lamp. For thousands of years in oil as energy sources to oil lamps lighting the fire under human civilization and have dominated the planet.

Lamp era of human existence is still working hard for the wisdom of the future ---- we should make unremitting efforts! Lighting, lighting is a combination of science and art, is an important part of the overall space accessories. Lighting is the primary role of lighting, medical certificates natural light stimulate the growth of brain cells and hormones encouraging people to stay awake during the day, when the light is insufficient sleep. Even in the dim light of long-term sense of frustration and fatigue. So we have to analyze the function and use of space, consider lighting atmosphere, methods, and illumination, to select the type of lighting (chandeliers, sconces, floor lamps, ceiling lamps, table lamps) to ensure space in each period to allow the owner to feel comfortable. Under the premise to meet the lighting and furniture style style, color, texture, match. Space artistic taste have improved. 5. Bond the new floors and blocking to the keel and frames (Figure 4-10). Wet out all mating surfaces and end grain with resin/hardener mixture. Apply G/flex 655 Adhesive or 105 Resin-based epoxy thickened with 406 Filler. Clamp in position until epoxy cures. Allow the epoxy to cure thoroughly before removing clamps and proceeding with the next step. 6. Drill two vertical holes at each hull frame, through the blocking and at least 3" into the keel.

The diameter of the holes should be 1 8" larger than the threaded rods selected for this repair. 7. Cut a piece of stainless or hot dipped galvanized threaded rod to match the depth of each hole. The threaded rod should be the same diameter as the original keel bolts. 8. Wet out one or two holes at a time with unthickened resin/hardener mixture. Allow the epoxy to penetrate the end grain inside the hole.A keel is a major structural component and should get extra care and special investigation. Skegs, deadwood or fin keels can pose special problems. Deadwood can be inside or outside the planking line and typically has a fair number of exposed seams. It is generally not wise to encase the skeg or deadwood in a fiberglass/epoxy skin unless you have stabilized the joints in the structure. Worm damage may require replacement of the specific pieces. If work is needed on the garboards, floors or frame heels, it is a good idea to examine the keel while the garboards are off. The joints and rabbets are prime locations for rot to start.

Trim all of the strips to size

Posted in Wrestling Forums by meishengchao at 01:42, May 15 2015

Thicken the mixture with 406 Filler to a catsup consistency. Be sure one side coated with thickened epoxy faces each joint. 4. Clamp the strips to the jig until the epoxy cures (Figure 4-2). Use clamps, wedges, staples or small nails to apply enough pressure to squeeze a small amount of epoxy from each joint.Remove the frame from the jig after the epoxy has thoroughly cured. Be sure to allow extra cure time if the temperature is cool, especially if you expect a lot of springback. Trim the frame to its final shape and finish as desired. 4.1.2 Laminating frames in place cheapest way to waterproofing under deckThe new frame or frame section can, in some cases, be laminated directly in place in the hull. The existing structure can be used as the laminating jig in one of the following ways: A) Bond all of the strips permanently to the structure in one continuous operation, either one at a time or all at the same time, depending on the best available clamping method. Use non-corroding screws or staples to bond strips in place one at a time, if temporary clamping is not feasible. Try a dry run to see which method will work best.

Trim all of the strips to size before bonding. B) Bond all of the strips together in place with plastic over the hull contact area to prevent immediate bonding to the hull. Remove the laid up frame and trim to size. Bond the new frame back into place permanently, as previously described.Often a framing member is too damaged to be repaired and replacement is the best option. Replace a damaged frame as follows: 1. Support the hull and remaining structure before removing frames. If necessary, leave some damaged frames to maintain the shape, replacing them after new frames are installed.No deformation hollow post outdoor Remove all fasteners holding the frame. Cut the damaged frames into sections, if necessary, to remove them. 2. Laminate the replacement frame using the instructions in Section 4.1.1.

You may also cut or steam bend a frame to match the original if you choose. Trim the frame to fit. 3. Prepare the frame and contact area for bonding. Avoid bonding to anything you intend to remove later. 4. Install the frame. Wet out all contact areas with epoxy. Apply a thickened epoxy/406 mixture to one side of each contact area.If gaps exist between the frame and floors or the floors and the keel, they will cause the garboard seam to open. The following repair procedures will correct the problem and permanently attach the floors to the frames and keel: 1. Remove the garboards no split rail fence in Hungaryand one or two additional planks from each side of the hull. 2. Prepare the keel, floors, and frames. Remove old paint or varnish and sand to bare wood. Dry the area thoroughly. 3. Cut new floors to fit opposite the old floors on the opposite side of the frames. They may be laminated or cut from solid stock. 4. Cut filler blocks that fit between the frames and between the new and old floors.

Cut a replacement piece of wood

Posted in Wrestling Forums by meishengchao at 11:24, May 14 2015

2. If access is possible and the tongue is loose or broken, tape the underside of the seams. 3. Force thickened epoxy403 or 406 (mayonnaise consistency) as thoroughly into the seams as possible. This mixture, forced with a 5" wide putty knife, can flow about the tongue and groove joint and into the underside seam, thereby achieving a complete bond of the mating planks. 5.2 Lapstrake Planked Hulls Lapstrake (or clinker), like carvel planking, is composed of a single layer of planks thin enough to bend to the shape of the hull. However, each plank (or strake) overlaps the face of the preceding plank rather than butting the edge of it. Wooden lapstrake hulls often have trouble with the lap fasteners working seams open, causing leaks. The most successful repair is to clean out the lapped seams and bond the planks together with epoxy. It will be very helpful to work on your boat upside down if it is small enough to turn over.

Repair lapstrake hulls as follows: 1. Remove all paint or old finish on the outside of the hull.Scrape the old paint and caulk out of all the seams. Use a custom scraping tool to clean out and abrade the plank mating surfaces down to bare wood (Figure 5-. 2. Cut a replacement piece of wood for the opening and a piece for a backing plate (Figure 5-7). A backing plate will be required behind each butt joint unless the joint falls on a frame. When the repair section falls between frames, the backing plate should run from frame to frame. When replacing longer sections of planking, a backing plate is only required at the ends.Wet out all mating surfaces with resin/hardener mixture. 4. Apply thickened epoxy/403 or 406 (peanut butter consistency) to the mating surfaces (including the surface of the backing plate facing the plank). 5. Install the backing plate(s) to the back of the planking. Temporarily clamp the backer in position with screws, staples or nails. 6. Install the new plank section. Clamp the section in position with screws, staples or nails. Fill remaining openings in seams with thickened epoxy.

7. Remove clamps and fair the surface after the epoxy has cured thoroughly. 5.1.5 Double Planking Repairs to double planked boats involve removing the outer layer of planking, repairing the inner layer following the procedures already described in Section 5.1, and then reinstalling or if necessary, replacing the outer layer of planks. 6. Clamp the scarfed section in place with temporary screws or staples until the epoxy has cured. Corrosion-resistant screws can be left in if the pilot holes were wet out with epoxy. 7. Remove clamps and fair the surface after the epoxy has cured thoroughly. Butt joint method The butt joint is an alternative to the scarf joint for repairing damaged planks in place. Although not as strong as the scarf, it is considerably easier to do. Butt joints should be staggered (adjacent planks should not end at the same place). To repair a damaged plank section using butt joints: 1. Remove the damaged portion of the plank using a circular saw, hand saw, saber saw or chisel.

24661 items in this category.
Showing 20 items per page.